
2-7% v/v
According to the region and time of application.
Jato directed: 200-400 L/ha
Tratorized: 600-800 L/ha
Spray immediately after pruning, when the gems are still dormant.
Normally, only 1 treatment is sufficient.
RS and SC
Dose: 2-3% v/v
Southeast and PR
Dose: 3-5% v/v
Other regions of Brazil
Dose: 5-6% v/v
North and Northeast Region, from May to August
Dose: 6-7% v/v
Spray immediately after pruning, when the gems are still dormant.
Oil should not be added by heat, due to the risk of phytotoxicity; it is advisable to add a non-ionic thickener.
Not determined due to the application being carried out only during the dormant period of the cultures.
Do not enter the area where the product has been applied before the complete drying of the boiler, at least 24 hours after the application.
If you need to enter before this period, use the personal protective equipment (PPE) recommended for use during application.
FRUITSCREEN should be diluted in water, add mineral oil or adhesive sealant as recommended and applied by spraying on the branches, so as to reach all the gems. The branches should be well ground to the point of runoff.
Normally, FRUITSCREEN is applied on defoliated plants. When the plants are foliated and only wish to awaken a certain number of gems, a localized treatment should be made with a directed treatment with the jato directly on these gems, without reaching the foliage. In pruned plants, the application of FRUITSCREEN should be carried out up to 72 hours after this operation. Ideally, it should be done on the same day of pruning.
Caldas de FRUITSCREEN can be applied with a manual side sprayer. The assembly of 2 sprayers, in curved extensions in order to reach two sides of a branch at the same time, is convenient. Motorized sprayers can be used, with hoses and guns, or with nozzles mounted on fixed structures, so that the sprayers reach the parts of the plants to be treated.
It is considered that, for cultures planted in close lines, there is a tendency for the cats to overpass the lines that are being treated and reach neighboring lines. Avoid overlapping of the cables. Use nozzles with low pressure, low pressure conical jet.
FRUITSCREEN should be sprayed up to the point of runoff, so as to reach the gems. Therefore, the volume of broth depends on the spraying equipment and the quantity of branches, trunks and age of the plant to be treated, and a vacuum test should be carried out to define the application rate whenever necessary.
Recomenda-se for grape culture:
Application with tratorized equipment: 600 to 800 L/ha
Application with directed data: 200 to 400 L/ha
FRUITSCREEN is a very reative product and should not be applied with any other product, except emulsifiable mineral oil or adhesive thickener, when specifically recommended.
When in contact with cupric fungicides, there may be a reaction with the formation of cupric cyanamide, with black coloration, with no effect on dormancy.
To avoid this, an interval of 3 weeks is necessary between the use of cupric and FRUITSCREEN, or 1 week when the application of FRUITSCREEN depois de produtos cúpricos.
0.8-1.2% v/v
Dose adjusted according to region.
Costal: 500-700 L/ha
Tratorized: 1000-1500 L/ha
When the gems reach stage B.
Normally, 1 treatment is sufficient.
RS and SC
Dose: 2-3% v/v
Southeast and PR
Dose: 3-5% v/v
Other regions of Brazil
Dose: 5-6% v/v
North and Northeast Region, from May to August
Dose: 6-7% v/v
Spray immediately after pruning, when the gems are still dormant.
Oil should not be added by heat, due to the risk of phytotoxicity; it is advisable to add a non-ionic thickener.
Not determined due to the application being carried out only during the dormant period of the cultures.
Do not enter the area where the product has been applied before the complete drying of the boiler, at least 24 hours after the application.
If you need to enter before this period, use the personal protective equipment (PPE) recommended for use during application.
FRUITSCREEN should be diluted in water, add mineral oil or adhesive sealant as recommended and applied by spraying on the branches, so as to reach all the gems. The branches should be well ground to the point of runoff.
Normally, FRUITSCREEN is applied on defoliated plants. When the plants are foliated and only wish to awaken a certain number of gems, a localized treatment should be made with a directed treatment with the jato directly on these gems, without reaching the foliage. In pruned plants, the application of FRUITSCREEN should be carried out up to 72 hours after this operation. Ideally, it should be done on the same day of pruning.
Caldas de FRUITSCREEN can be applied with a manual side sprayer. The assembly of 2 sprayers, in curved extensions in order to reach two sides of a branch at the same time, is convenient. Motorized sprayers can be used, with hoses and guns, or with nozzles mounted on fixed structures, so that the sprayers reach the parts of the plants to be treated.
Considera-se-se que FRUITSCREEN For crops planted in close lines, there is a tendency for the plants to overpass the lines that are being treated and reach neighboring lines. Avoid overlapping of the jacks. Use nozzles with a low pressure, low pressure, high pressure conical jet.
FRUITSCREEN is a very reactive product and should not be applied with any other product except emulsifiable mineral oil, or adhesive thickener, when specifically recommended.
When in contact with cupric fungicides, there may be a reaction with the formation of cupric cyanamide, with black coloration, with no effect on dormancy.
To avoid this, an interval of 3 weeks is necessary between the use of cupric and FRUITSCREEN or 1 week when the application of FRUITSCREEN depois de produtos cúpricos.
Important note: The documents available on this page are regularly updated according to the requirements of the Ministry of Agriculture, Livestock and Supply (MAPA). To ensure that you are using the most recent information, we recommend checking the date of update in each document. In case of doubts, please contact our technical department.